If your garage door has ever jumped off its track, you are aware of how inconvenient. It is as well as how it leaves your home susceptible to intruders until it can be repaired. If this has happened to you, you probably already know both of these things.

You don’t have to wait for a repairman to schedule a visit because you can easily fix the garage door on your own with only a few simple tools. Because you won’t be working with the door’s tension spring, this task is one that you can carry out without risk.

  1. Take the garage door opener and place it in a separate location. Reaching up overhead will allow you to pull the rope that will release the door from the opener.
  2. Efficiently open the door for me After determining which of the door’s wheels is veering off the track, you can use locking pliers to fix the door by sliding them underneath the door and onto one of the tracks. The pliers are utilized in order to create a stop.
  3. Take a pair of pliers and use them to pull the outside edge of the track open. This will allow you to swiftly place the wheels back on the track. After you have the door back where it belongs on the track, use a rubber mallet to realign the track. Put away the pliers with the locking mechanism.
  4. In order to ensure that the door is opening and closing correctly, you should manually raise and lower it. Utilize the door’s remote control in order to operate the automatic door opener. When the door opener reaches the end of its cycle, it should perform one final catching and locking action on the door’s release mechanism before beginning to operate the door.

Things You Will Need


Taking some basic preventative maintenance steps can assist in preventing the door from flying off its tracks once again. Examine very carefully the brackets that are preventing the tracks from moving.

Check to see if any of the screws or bolts have come free. The motion of the door can sometimes work loose the screws holding them in place. Make the fasteners as snug as possible with a screwdriver or an adjustable wrench.

After you have completed this stage, the vertical component of the tracks should continue to be linear in an upward and downward direction. In order to determine whether or not the tracks are straight, a carpenter’s level should be placed against them.

You can modify them by first slackening the screws holding the brackets in place, then re-leveling the track, and finally re-tightening the screws.

Spraying the door with silicone lubricant on a regular basis will keep it sliding smoothly. In order to prevent damage to the track, worn-out rollers must be replaced as quickly as possible with new ones.

How to Fix a Garage Door When It Becomes Detached

If your garage door ever comes loose from its track, you should immediately stop using it. If the door continues to function normally, it may sustain substantial damage.

To realign the garage door, you will need the assistance of a trained professional. It would be necessary to smooth out some of the door panels, and possibly even replace some of them.

If the detached garage door just comes off its track and you are able to catch it before any damage is done. you will be able to repair the door on your own by putting the rollers back onto the track and repairing the door itself.

Detach the door from the garage door opener and set it in the open position. You should look for a rope and handle that are dangling from the center of the door opener track. Raise your hand and then pull back on the handle in order to disengage the opener.

Raise the door to its halfway position and, as you do so, realign one pair of rollers with the problematic area on the garage door track. You can keep the door from swinging open by securing a pair of locking pliers to the track that is located near the bottom of the door.

Using a pair of pliers, release the locking mechanism on the garage door track near where the rollers jumped it. There is a possibility that the width of the track is already sufficient to enable the rollers’ wheels to be guided back onto it. Placing a small block of wood against the edge of the opening in the track and using the block as a buffer while you pound the track straight again with a wooden mallet are both good ways to go about fixing the issue.

Remove the pliers that have a locking mechanism. The threshold of the door is brought down to the ground.

Make advantage of the remote control that comes with the door opener so you can shut the door. As soon as the door opener finishes its actions, the release mechanism should return to its original position, catching the door and restoring the remote’s ability to operate the door.

Make sure the door works properly by opening and closing it multiple times before moving on. Keep a close eye on the rollers on both sides to look for any additional problems that may have occurred. If there are any spots along the track where the rollers are catching or dragging, you should straighten them out.

Tip Door Roller

Maintaining a frequent clearing of the path of debris is essential. Lubricating the rollers on the garage door with silicone spray can allow you to get more use out of them during their lifespan.

Check that each of the bolts that are holding the garage door track in place is secure. In addition, check the fasteners that are holding the door’s component sections together to see if they are secure.

The garage door track should be level and straight in both the vertical and horizontal planes. Check it with a carpenter’s level to make sure. Modify it as needed by first gradually releasing the tension on the supporting brackets, then changing the track, and finally reapplying the tension to the brackets.


Leave a Reply

Your email address will not be published. Required fields are marked *